Micro concrete maintenance products (floor cleaner, bathroom cleaner…)

MA’S FLOOR CLEANER

Cleans and degreases all washable floor coverings

Edition of 01/03/2023

Presentation

Over 95% biodegradable professional cleaning product. Marius Aurenti floor cleaner is neutral, acid-free, ammonia-free and alkali-free. It leaves surfaces clean and grease-free. Suitable for all washable floor coverings such as micro concrete floors, floor resins, tiles, painted surfaces, plastics, PVC and linoleum.

INSTRUCTIONS FOR USE

For routine maintenance, dilute 20 ml Marius Aurenti cleaner in 8 liters of water.

Clean floors with a mop or broom.

For single-brush cleaning, dilute 50 ml Marius Aurenti cleaner in 8 liters of water.

Divide large surfaces into strips of 2 metres to 2.50 metres.

Spray on the mixture, brush and polish.

TECHNICAL DATA

Maintenance: 20 ml Washing: 50 ml Appearance: liquid Density at 20°C: 1.03 *

Over 95% biodegradable pH value: neutral

How to maintain a micro concrete surface 3

Prevent soiling!

For example, a floor mat will limit stains, especially on garden floors. Good concrete maintenance involves cleaning in several stages.

For your varnished concrete interiors

• Vacuum up dust with a vacuum cleaner fitted with brushes.
• Clean with Floor Cleaner and water. Make sure you use the correct quantity, as these are highly effective professional products.
• Don’t hesitate to scrub the floor with your floorcloth. The use of a scrubber-drier or a single-brush machine with a suitable disc is possible for large surfaces.
• Renew wash water (warm or hot water).
• Do not expose the coating to water or steam temperatures in excess of 80°C. Rinsing with water eliminates deposits of cleaning products that can eventually clog the floor.
• Clean white traces of limescale with Antibacterial Limescale Cleaner and rinse with water.
• Clean the greasiest areas (worktops, kitchen floors, etc.) with Multi-Purpose Degreaser Cleaner diluted 1 to 2% and rinse with water.
• Clean persistent surface marks, such as black shoe marks, with a scraping sponge (red) or a special sponge for enamel or glass-ceramic. Green sponges can scratch varnish.
• Do not add black soap, linseed oil or other nourishing products to surfaces to avoid clogging.

For micro concrete interiors

• Use the same cleaning method as for your varnished concrete interiors.
• However, we recommend that you renew the wax after cleaning by applying a coat of spray wax and spreading it with an applicator broom or paint glove. This operation can be carried out using a polisher or a single-brush machine with a suitable disc.

Precautions for use

The product is irritating to eyes and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of reach of children. Use gloves. Store away from frost and heat, in a dry place. All information presented in this data sheet is given for information only and does not engage our responsibility. Testing is necessary.

ANTI-SCALE / ANTI-BACTERIAL CLEANER

Cleans, disinfects and descales all types of surfaces

Edition of 01/03/2023

Presentation

Professional cleaning product over 90% biodegradable. Developed in the sanitary and medical fields, Ma’s cleaner is a powerful bactericide and scale inhibitor. It disinfects, removes soap scum and limescale and leaves surfaces perfectly clean. Ideal for cleaning worktops, tiles, taps, washbasins, baths and toilets.

INSTRUCTIONS FOR USE

Spray Ma’s anti-bacterial limescale cleaner onto the surface to be cleaned. Spread over the entire surface with a damp sponge and leave on for a few minutes. Rinse with clean water.

TECHNICAL DATA

Appearance: liquid

Density at 20°C: 0.99

Over 90% biodegradable pH value: 1.3

How do I maintain a micro concrete surface?

Prevent soiling!

For example, a floor mat will limit stains, especially on garden floors. Good concrete maintenance involves cleaning in several stages.

For your varnished concrete interiors

• Vacuum up dust with a vacuum cleaner fitted with brushes.
• Clean with Floor Cleaner and water. Make sure you use the correct quantity, as these are highly effective professional products.
• Don’t hesitate to scrub the floor with your floorcloth. The use of a scrubber-drier or a single-brush machine with a suitable disc is possible for large surfaces.
• Renew wash water (warm or hot water).
• Do not expose the coating to water or steam temperatures in excess of 80°C. Rinsing with water eliminates deposits of cleaning products that can eventually clog the floor.
• Clean white traces of limescale with Antibacterial Limescale Cleaner and rinse with water.
• Clean the greasiest areas (worktops, kitchen floors, etc.) with Multi-Purpose Degreaser Cleaner diluted 1 to 2% and rinse with water.
• Clean persistent surface marks, such as black shoe marks, with a scraping sponge (red) or a special sponge for enamel or glass-ceramic. Green sponges can scratch varnish.
• Do not add black soap, linseed oil or other nourishing products to surfaces to avoid clogging.

For micro concrete interiors

• Use the same cleaning method as for your varnished concrete interiors.
• However, we recommend that you renew the wax after cleaning by applying a coat of spray wax and spreading it with an applicator broom or paint glove. This operation can be carried out using a polisher or a single-brush machine with a suitable disc.

Precautions for use

The product is irritating to eyes and skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep out of reach of children. Use gloves. Store away from frost and heat, in a dry place. All information presented in this data sheet is given for information only and does not engage our responsibility. Testing is necessary.

MULTI-PURPOSE CLEANER-DEGREASER

Cleans and degreases all types of surfaces

Edition of 01/03/2023

Presentation

GENERAL

Super-concentrated cleaner with high degreasing power, over 95% biodegradable.

DESTINATION

Suitable for a wide range of applications.

• Cleaning of micro concrete, marble, terracotta, tiles, parquet, carpets and plastics.
• Pre-work paintwork cleaning, bathrooms, kitchens, shower rooms.

It is also suitable for food applications.

• Cleaning of kitchens, floors, cold rooms, sinks, work tables, aluminum and stainless steel containers.

INSTRUCTIONS FOR USE

Dilute the product in a large quantity of water.

In normal use, 1 part Multi-Purpose Cleaner Degreaser to 100 parts water (i.e. 10 ml product to 1 l water).

For particularly difficult tasks, dilute 1 part multi-purpose degreasing cleaner to 10 parts water. (100 ml of product for 1 l of water).

Apply with broom, sponge or brush.

Can also be applied with a low-pressure sprayer.

Rinse after use to remove product and neutralize pH.

PRECAUTIONS FOR USE

Do not use undiluted. Do not mix with organic acids. Do not mix with other household products.

CONSERVATION

24 months maximum in original packaging

PH VALUE

Concentrated: 13.0

Diluted to 2% in water: 11.0

COMPONENTS

Cationic surfactants, foam stabilizers, sodium hydroxide less than 5%.

DEGRADABILITY OF SURFACTANTS

Above 95%, the

How to maintain a micro concrete surface 3

HOW TO MAINTAIN A MICRO CONCRETE SURFACE?

Prevent soiling!

For example, a floor mat will limit stains, especially on garden floors. Good concrete maintenance involves cleaning in several stages.

For your varnished concrete interiors

Vacuum up dust with a vacuum cleaner fitted with brushes.

Clean with Floor Cleaner and water. Make sure you use the correct quantity, as these are highly effective professional products.

Don’t hesitate to scrub the floor with your mop. A scrubber-drier or single-brush machine with a suitable disc can be used for larger surfaces.

Renew wash water (warm or hot water).

Do not expose the coating to water or steam temperatures in excess of 80°C.

Rinsing with water eliminates deposits of cleaning products that can eventually clog the floor.

Clean white traces of limescale with Antibacterial Limescale Cleaner and rinse with water. Clean the greasiest areas (worktops, kitchen floors, etc.) with Multi-Purpose Degreaser Cleaner diluted 1 to 2% and rinse with water.

Clean persistent surface marks, such as black shoe marks, with a scraping sponge (red) or a special sponge for enamel or glass-ceramic. Green sponges can scratch varnish.

Do not add black soap, linseed oil or other nourishing products to surfaces to avoid clogging.

For micro concrete interiors

Use the same cleaning method as for your varnished concrete interiors. However, we recommend that you renew the wax after cleaning by applying a coat of spray wax and spreading it with an applicator broom or paint glove. This operation can be carried out using a polisher or a single-brush machine with a suitable disc.

HOW TO SCOUR AND DEEP-CLEAN?

If your surface has become clogged over time, you can carry out a thorough descaling.

For varnished interior concrete surfaces and oil-repellent exterior floors.

Use Multi-Purpose Degreaser Cleaner with a 10% dilution in warm or hot water. Leave for a few minutes before scrubbing with a broom or single-brush machine (rental available).

Repeat the operation if necessary, preferably sucking up the water or pulling with a squeegee to a draining point. This can also be done locally in areas of high stress. Rinse thoroughly with clean water, the result is always astonishingly effective!

For micro concrete interior surfaces

Use the same cleaning method as for your varnished concrete interiors, and renew the wax after degreasing by applying a coat of spray wax and spreading it with an applicator broom and/or single brush.

With time, traffic and abrasion, top coats can wear off and the surface can become dirty or damaged. In many cases, a thorough cleaning and polishing of micro-scratches is all that’s needed to avoid having to renew the finishing coats. However, if the substrate has numerous micro-scratches or is starting to become porous, it’s time to renew the top coats.

Varnished concrete interior surface

Use Multi-Purpose Degreaser Cleaner diluted to 10% and rinse with water.

Lightly sand the surface with 120-grit sandpaper, remove dust with water and, after drying, apply 1 to 3 coats of Varnish.